







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterThe First Step in a Kitchen Remodel in Frisco Is Checking What’s Under the Slab
The first step in a kitchen remodel is confirming what’s inside your foundation before anyone draws a layout. In Frisco, that means locating the post-tension cables running roughly 18 inches below your floor, because those cables will veto any island, drain relocation, or wall removal that looks fine on paper. Most contractors start by measuring the room. We start by understanding what the room sits on. If you want a straight answer on your own kitchen, call Penhallow Remodeling Frisco at (833) 954-5757 before you pick a cabinet line.


Why Does a Frisco Slab Change the Order of a Remodel?
Nearly every subdivision built here from 1995 forward is slab-on-grade with a post-tension foundation, and that’s not a technical footnote: it’s the thing that decides which layouts are actually buildable. Post-tension cables are steel strands stretched through the concrete and anchored at the edges. They hold the slab together against North Texas clay that swells when it’s wet and shrinks when it’s dry, and the soil under Stonebriar and Newman Village moves enough to matter.
The catch is that you can’t see the cables. Cut or core into a tensioned strand without locating it first and you can crack the slab, pop an anchor, or worse. So a drain that needs to move twelve inches, an island you’ve always wanted, or a load-bearing wall you’d like gone all hinge on a cable-locate scan. That scan happens before design, not after it.
What Our First Visit Actually Looks Like
The first visit isn’t a sales call. It’s fact-finding, and we’d rather spend an hour on the front end than surprise you on demo day. Here’s the order we work in, and why.
- Site walk-through. We measure the footprint, look at existing plumbing and electrical runs, and note how the current kitchen is used. This is where a half wall you thought was load-bearing gets sorted from the cabinets that just look intimidating.
- Slab and cable consideration. We flag where post-tension cables are likely running and confirm placement before any plan that touches the floor or a structural wall moves forward. This is a “what to check” step, not a “how to do it yourself” one; cable locating and any concrete cutting belong to trained professionals.
- Scope and permit check. In Frisco, whether your planned scope triggers a City of Frisco permit changes both timeline and budget. Better to answer that now than to fall in love with a layout that needs a six-week permitting detour.
- The written price. Every homeowner gets a written number before any work starts, so the figure on day one is the number on the invoice. No verbal ballpark that drifts at the door.
Our technicians have up to 22 years of experience, so when we say a foundation detail will shape the plan, it comes from having seen it on Frisco slabs before. That first visit is also why our Kitchen Remodeling process is built around what we find in your specific house, not a template.

Does the Permit Question Belong at Step One?
Yes. Knowing upfront whether your scope triggers a City of Frisco permit is the difference between a plan that flows and one that stalls. Move a drain, change a wall, add plumbing for a relocated sink: any of those can pull in permitting and inspection, and each adds time and cost you want to see before you commit. We ask the permit question during that first discovery visit precisely so a design decision doesn’t quietly become a schedule problem.
This is the same reason The Kingswell Way puts the price in writing before work starts. Say the price before the work, show up in the window we gave, leave the place cleaner than we found it. On a Frisco kitchen, that means the scope document is honest about permitting and structural limits from the first page.
Why the First Decision Locks the Rest
Remodel sequence is a cascade, and the first pick sets off the ones that follow. Cabinets have to be ordered before countertops are templated, because you can’t template a counter over a cabinet that hasn’t landed. Countertops must be templated before fixtures are finalized, because sink and faucet specs depend on the finished surface. Get that order wrong and you’re re-cutting stone or re-ordering a sink that doesn’t fit the hole.
That’s why a written scope at step one matters more than a mood board. It fixes cabinet dimensions, then countertop material, then fixtures, in a sequence everyone can hold. We install KraftMaid and Wellborn cabinetry, and we template Cambria, Silestone, and Caesarstone counters, so the cascade runs in the right order instead of into a change-order avalanche that lands on your invoice weeks later.

What Does a Kitchen Remodel Cost in Frisco?
Kitchen remodels in Frisco typically run $14,000 to $45,000 depending on layout, cabinet line, and countertop material. A few line items show where the money sits:
| Scope | Typical Frisco range |
|---|---|
| Full kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
Notice that the island and the cabinet lines are the two biggest swing factors, and both touch your slab. A relocated drain for an island is a cable-locate and plumbing question before it’s a price. For the fuller scope, see our Kitchen Remodeling in Frisco page. The number you get is written before any work starts, and the 365-Day Done Right Promise covers it in writing.
What If a Layout Idea Turns Out to Be Unbuildable?
Better to learn that in discovery than after a hole is cut. When a cable scan or a structural check rules out a layout, we don’t just say no; we show you what the slab allows. Sometimes a small shift to the island or a drain reroute solves it. Sometimes the better kitchen is a different plan entirely. That conversation is a lot easier when it happens before the concrete saw comes out.
Homeowners who’ve been burned by a price that ballooned after demo day tend to appreciate how early that limit gets surfaced. Cutting or coring a post-tension slab is genuinely dangerous work, and cable locating and concrete cutting always belong to trained professionals. Our part is making sure the plan respects the slab before anyone touches it.
FAQs
In Frisco, the first step is confirming what’s inside your foundation before design begins, because post-tension cables in the slab decide which islands, drain moves, and wall removals are buildable. A site visit and cable-locate check come before layout and before any written scope. Call (833) 954-5757 to get that first visit scheduled.
Often yes, and it depends on your scope; moving plumbing, changing a structural wall, or adding significant electrical can trigger a City of Frisco permit. Knowing that at step one changes both timeline and budget, so we answer it during the first visit. Call for a free estimate and we’ll flag it for your project.
Because countertops are templated to the cabinets beneath them, so cabinets must be ordered and set before any counter is cut. Pick the counter first and you risk a re-cut when cabinet dimensions shift. Getting the sequence right is part of the written scope, and estimates are free; call (833) 954-5757.
Yes: kitchen remodels here typically run $14,000 to $45,000, and we put the exact number in writing before any work starts. The final figure depends on layout, cabinet line, and countertop material. Call (833) 954-5757 for an exact quote; there’s no charge for the estimate.
Ready to Start on the Right Footing?
If you’d rather have it looked at, Penhallow Remodeling Frisco offers a no-pressure assessment in Frisco. You’ll get a site visit that treats the slab as the first question, a permit check, and a written price before work starts. The 365-Day Done Right Promise backs the work in writing, and a real person answers the phone 24/7. Call (833) 954-5757 for a free estimate when you’re ready, or look over our home page first to see what we do.
Written by the team at Penhallow Remodeling Frisco, serving Frisco, TX.


