







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling in Frisco: What to Know First
Cambria kitchen remodeling in Frisco typically runs $14,000 – $45,000 for a full kitchen and $9,000 – $20,000 for a smaller one, with most projects finished in three to six weeks once materials are in hand. We’re an independent Cambria service provider, which means we’re not tied to or authorized by the manufacturer – we’re tied to the written price and the written guarantee instead. You get a real number before any cabinet comes out, and that number is the one on the invoice.
This page is for Frisco homeowners who already have Cambria quartz on the counter or are planning around it, and want to know what actually happens during a kitchen remodel, what it costs, and how the surface gets protected along the way. Call (833) 954-5757 for a free estimate.
How Cambria Products Fail – and How We Fix Them
Cambria quartz is a strong surface, but it doesn’t fail the way granite or laminate does. The problems we see in Frisco kitchens are almost always about what happened underneath the slab or at the edge, not the quartz itself. Here’s what shows up and what we do about it.
- Seam separation along the sink run. Cambria’s engineered slabs are non-porous, so water doesn’t soak in – but it can wick into an under-sealed seam near a dishwasher or sink and cause the joint to open over a couple of summers. In Frisco’s hot, dry stretch from June through September, indoor humidity swings when the AC runs hard, and that movement shows first at the seams. We reset the seam with color-matched epoxy and a fresh substrate check underneath.
- Edge chipping at the dishwasher cutout. Cambria’s thinner 1cm and 2cm profiles (common in the Torquay and Ella lines) can chip at a tight inside corner if the fabricator cut too close to the edge. It’s a cut geometry problem, not a material problem. We template the opening properly and add a supported reveal so the edge isn’t carrying load.
- Sagging over a wide cabinet span. Cambria slabs are heavy, and a peninsula over a 30-inch cabinet gap with no mid-support will deflect. You’ll see a hairline crack or a seam that won’t stay closed. The fix is structural: we add support blocking or a leg before re-setting the top.
- Staining at the backsplash joint. Cambria’s surface resists stains, but the caulk line where the slab meets the backsplash is where cooking grease and cleaning spray collect. Over time a clear caulk goes cloudy and pulls away. We cut out the old bead, clean the joint, and re-caulk with a kitchen-grade silicone rated for the wet zone.
- Heat damage near the range. A hot pan set directly on a Cambria edge, or a slow cooker base left on the surface, can leave a thermal mark that won’t polish out because the resin is engineered into the slab. Cambria recommends a trivet and so do we. If a mark is already there, we can fabricate a matching piece for a small repair or advise on replacement sections rather than trying to sand it out, which damages the finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Cambria Kitchen Remodeling Process
Every Cambria kitchen we take on in Frisco follows the same order, and you know the price before step three begins.
- 1
Walk-through and measurement. We look at the cabinets, the substrate under the current top, and the plumbing and electrical rough-in. We note whether you’re keeping the Cambria slab or replacing it, because that changes everything downstream.
- 2
Written price. Before any work starts, you get a line-item number: demolition, cabinet line, countertop fabrication and install, backsplash, labor. No range, no verbal ballpark. If it changes later, it’s because you asked for a change, and we price that in writing too.
- 3
Parts and materials decision. If we’re replacing the Cambria, we discuss whether a matching series is still in production or whether a current line is the better fit. For cabinets, KraftMaid and Wellborn are our two workhorses and both hold up well in Frisco’s climate. If the Cambria stays, we plan the protection and re-install carefully around it.
- 4
Demo and install. Background-checked, uniformed technicians on every day of the job. Substrate goes down first – cement board or a proper plywood build-up, depending on the countertop and cabinet spec. The Cambria is set, seamed, and edged by a fabricator who works with quartz every week.
- 5
Test and walkthrough. We check every seam, every edge, the sink seal, and the backsplash joint. You walk the kitchen with us before we call it done.
- 6
Guarantee and cleanup. The 365-Day Done Right Promise is in writing with the job. If something fails inside that year, we come back and fix it at no charge. And we leave the place cleaner than we found it – that’s part of The Kingswell Way.
See the difference
Before
After
Before
After
Before
AfterWhat Cambria Kitchen Remodeling Costs in Frisco

Here are the real ranges for the work we do most often in Frisco kitchens. Your number depends on cabinet line, slab size and edge profile, and whether the plumbing or electrical has to move.
- Full kitchen remodel: $14,000 – $45,000 – cabinets, Cambria countertop, backsplash, flooring, and labor
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation (Cambria): $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
What pushes the number up: a larger slab footprint with more seams, a waterfall edge or a thick mitered edge on the Cambria, moving the sink or range, and upgrading to a premium cabinet line. What can bring it down: keeping the existing Cambria and refacing the cabinets, or a smaller footprint that needs less material. Call (833) 954-5757 for a free estimate – you’ll get a written price before anyone picks up a tool.
Why Frisco Homeowners Call Penhallow Remodeling Frisco for Cambria Work
Most of the Cambria kitchens we walk into in Frisco start with a story about a contractor who didn’t show or a price that grew after demo. We answer the phone. A live person picks up 24/7 – no voicemail, no callback window. Our technicians are background-checked and arrive in uniform, so you know who’s in your home. Every job gets a written price before work starts and the 365-Day Done Right Promise in writing alongside it. If a seam opens or a repair fails inside that year, we come back and make it right at no charge, and the return visit is free. Our technicians have up to 22 years of experience, and we work with Cambria as one of several brands we install – Silestone and Caesarstone for quartz, KraftMaid and Wellborn for cabinets, Kohler and Toto for fixtures. That range means we’re advising on your kitchen, not selling one brand.
FAQs

No, not if the slab is handled and installed correctly. Cambria’s warranty covers the material against manufacturing defects, and it stays valid as long as the surface is installed to their spec and not abused. We template and set the Cambria to manufacturer standards, and we keep your original documentation with the job file. As an independent Cambria service provider, we’re not authorized to process warranty claims for you, but we’ll tell you honestly whether a problem is a warranty issue or a wear-and-tear issue. Call (833) 954-5757 with your questions – the estimate is free.
Sometimes, but not always. Cambria retires lines, and when that happens the exact match is gone. We can often find a current series close in tone and movement, or fabricate a repair piece from a leftover or a close match for a small section. For a full replacement, we’ll walk you through the current options and price them. Call (833) 954-5757 and we’ll tell you what’s realistic for your slab.
Repair is usually the right call for a chip, a seam, or a caulk line. Replace the slab when there’s a crack running through the body of the material or heat damage that won’t come out. A single seam reset runs within the countertop installation range of $2,000 – $6,500 only when the slab comes off; spot repairs usually land well under that. Call (833) 954-5757 for a look at yours.
Three to six weeks for a full kitchen, and one to two weeks for a countertop and backsplash only. The timeline is driven by cabinet lead time and fabrication scheduling, not by demo. We give you a written schedule with the price so you know what to expect. Call (833) 954-5757 to get yours started.
Yes, when the work requires one. Moving plumbing, electrical, or load-bearing walls in a Frisco kitchen needs a permit, and we handle pulling it and scheduling the inspection. Cosmetic work like a countertop swap or backsplash usually doesn’t. We’ll tell you which side of the line your job falls on before we quote. Call (833) 954-5757 for a free estimate.
Written by the team at Penhallow Remodeling Frisco, serving Frisco and nearby areas.












