







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling in Frisco: What to Know First
We provide independent Toto bathroom remodeling in Frisco, and most full bathroom projects we quote here run somewhere between $9,000 and $28,000 depending on how much tile, plumbing and fixture work the room needs. A straightforward vanity-and-fixture update can come in lower; a full gut with a walk-in shower and Toto toilet reinstall sits near the top of that range. You get a written price before any work starts, so the number you hear on the first visit is the number on the invoice. If you own a Toto toilet, Washlet seat or Toto shower trim and you’re planning a remodel around it, this page explains how we handle those products specifically. Call (833) 954-5757 and a real person answers, any hour, to set up your free estimate.
How Toto Products Fail – and How We Fix Them

Toto makes genuinely good bathroom products, which is exactly why owners want to keep them through a remodel rather than swap them out. The catch is that Toto failures rarely look like failures. They show up as small symptoms that get blamed on something else. Here’s what we actually see on Toto jobs in Frisco.
- Washlet seats that keep restarting or lose their bidet spray. On the S550e and similar electronic Washlet models, a seat that powers off and back on, or a spray that weakens, is often a scaled-up water inlet filter or a failing solenoid valve, not a dead unit. Frisco’s hard municipal water builds mineral scale in those small passages faster than owners expect. We pull and clean or replace the inlet screen and test the valve before anyone suggests a new seat.
- Fill valves that run long after the tank should be full. On Drake and Eco Drake models, a fill valve that keeps hissing or a tank that refills on its own points to a worn flapper or a fill valve that’s drifted out of adjustment. The Toto fill valve has a specific fill-rate setting, and dropping in a generic replacement changes how the bowl refills. We match the OEM valve so the flush volume stays where Toto designed it.
- Wax ring and flange leaks hidden under new tile. When we remodel a bathroom, the toilet comes out and goes back in. If the closet flange is cracked or set below the finished floor after new tile goes down, you get a slow leak that rots the subfloor without ever showing on the surface. Before we set a Toto toilet back, we check the flange height against the new floor and use the correct offset or extension so the seal is right the first time.
- Electronic bidet seats damaged by the wrong outlet or no GFCI. A Washlet needs a GFCI-protected outlet within reach of the seat, and plenty of Frisco bathrooms built before these seats were common don’t have one. Plugging a $700 seat into an unprotected circuit is a real hazard. We coordinate the outlet during the remodel so the seat is powered correctly and the cord isn’t stretched across the floor.
- Shower valve cartridges that seize from mineral scale. Toto shower trim and thermostatic valves can stiffen or stop adjusting when scale builds in the cartridge. We identify the exact cartridge for the valve body before ordering, because Toto uses different cartridges across its lines and the wrong one won’t seat. A seized cartridge gets replaced, not forced.
On parts, we choose OEM Toto replacement components when the model is still supported, because aftermarket flappers and fill valves can change flush performance and, on newer models, can affect the warranty. Where a quality aftermarket part is genuinely equivalent and the OEM is discontinued, we say so up front and explain the trade-off before installing anything. When a Toto toilet or seat has reached the end of its service life, we also install Kohler fixtures as a comparable alternative, so you have a real choice rather than a pressure sale.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Toto Bathroom Remodeling Process
- 1
Diagnose before we quote. We look at every Toto product in the room, test the toilet’s flush and fill, check the Washlet or bidet seat, and note the water supply and outlet situation. A leaking flange or a scaled valve changes the scope, so we find it before the price is written.
- 2
Write the price and the scope. You get a written price listing what stays, what gets replaced and which parts are OEM. No verbal ballpark. The number on day one is the number on the invoice.
- 3
Decide OEM versus aftermarket with you. For each Toto component, we tell you whether the OEM part is available, what an equivalent aftermarket part costs and what you give up. The decision is yours, in writing.
- 4
Do the remodel and the Toto work together. Tile, substrate (the moisture-resistant layer behind the tile), vanity, shower and toilet reinstall happen in one coordinated job so the toilet isn’t reset on a floor that’s still moving and the outlet isn’t forgotten behind new drywall.
- 5
Test everything before we call it done. We flush and refill the toilet, run the Washlet through its functions, check the shower valve through its full range and confirm no leaks at the flange and supply lines.
- 6
Back it with the 365-Day Done Right Promise. If something we touched fails inside the guarantee period, we come back and fix it at no charge. It’s covered in writing on every project.
See the difference
Before
After
Before
After
Before
AfterWhat Toto Bathroom Remodeling Costs in Frisco

Here are the real ranges we quote in Frisco, so you can plan before you call.
| Project | Typical range |
|---|---|
| Full bathroom remodel (Toto fixtures retained or reinstalled) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the number up or down: the condition of the subfloor and flange once the old floor comes up, whether the bathroom needs a new GFCI outlet for a Washlet, how much tile work the room requires, and whether the Toto valve or seat needs OEM parts. A Toto toilet reinstalled over a sound flange with good tile costs far less than one that needs a flange repair and subfloor work. Call (833) 954-5757 for an exact written quote. Estimates are free.
Why Frisco Homeowners Call Penhallow Remodeling Frisco for Toto Work
We’re an independent Toto service provider, not affiliated with or authorized by Toto, and we tell you that plainly. What we bring is a written price before any work starts, background-checked technicians in uniform on every job, and a live person answering the phone around the clock. Our technicians have up to 22 years of experience, including plenty of Toto toilets and Washlet seats. Every project carries the 365-Day Done Right Promise in writing, so if a repair fails inside the guarantee period we return and make it right at no charge. We source materials from recognized trade brands (KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, Kohler and Moen fixtures alongside your Toto products), so the products behind the guarantee are as solid as the promise. We operate under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it. Every Penhallow location is independently owned and operated as part of the Kingswell family of companies. That’s how we do a Toto remodel in Frisco.
FAQs

Reinstalling your Toto toilet during a remodel won’t void the warranty as long as it’s done correctly, but using the wrong parts or a poorly set flange can create problems Toto won’t cover. We match OEM components and check the flange height against the new floor so the install stays warranty-safe. Call (833) 954-5757 and we’ll walk through your specific model.
For most current Toto models, yes. We order OEM replacement flappers, fill valves, inlet filters and cartridges for the models Toto still supports, and if a part is discontinued we tell you and explain the aftermarket alternative before installing it. Call (833) 954-5757 with your model number and we’ll confirm availability.
Repair usually makes sense when the toilet is a supported model and the problem is a valve, flapper or seat component, since a quality Toto toilet lasts a long time. Replace when the bowl or tank is cracked or the model is discontinued and parts are hard to source. We give you a written price for both paths so you can compare. Call (833) 954-5757 for a free estimate.
A full bathroom remodel typically runs several days to a couple of weeks depending on tile work, plumbing changes and whether the room needs an outlet added for a Washlet seat. Small updates finish faster. You get a written timeline with your price before work starts. Call (833) 954-5757 to schedule.
No. The written price you receive before any work starts is the number on the invoice. If we open a wall and find something genuinely unexpected, we stop, show you, and get your approval in writing before adding anything. Call (833) 954-5757 for your free estimate.
Ready to plan your Toto bathroom remodel in Frisco? Call (833) 954-5757 for a free estimate. A real person answers any hour, and we’ll give you a written price and a written guarantee before a single tile is set.
Written by the team at Penhallow Remodeling Frisco, serving Frisco and nearby areas.












