A Penhallow company - serving Frisco, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
K
Kohler · Frisco

Kohler Kitchen Remodeling in Frisco, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Frisco
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Kitchen Remodeling in Frisco: What to Know First

Penhallow Remodeling Frisco provides independent Kohler kitchen remodeling in Frisco, and most full kitchens we handle take three to six weeks from demo to final walkthrough. As an independent Kohler service provider, we’re not affiliated with or authorized by Kohler, but we install and work around Kohler fixtures, sinks and faucets every week, and we put the price in writing before any work starts. A full kitchen remodel in Frisco typically runs $14,000 – $45,000 depending on layout, cabinet line and countertop material.

Call (833) 954-5757

This page is for Frisco homeowners who already own Kohler products (a farmhouse sink, a pull-down faucet, a filtered-water tap) and want a kitchen that’s built around them, not replaced around a generic spec. Call (833) 954-5757 for a free estimate.

How Kohler Products Fail – and How We Fix Them

Kohler makes solid products. But Frisco’s climate and hard water are hard on kitchen fittings, and some failure modes are specific to certain lines. Here’s what we actually see, and what we do about it.

  • Cartridge wear in Kohler pull-down faucets (the Simplice and Bellera lines especially). The ceramic cartridge inside these faucets wears down over years of use, and you’ll notice it as a faucet that drips at the base or one that gets stiff to turn. Frisco’s water is on the harder side, and mineral buildup accelerates that wear. We replace the cartridge with a Kohler OEM part rather than a cheaper aftermarket one, because the aftermarket cartridges we’ve pulled out of Frisco kitchens tend to fail again within a year or two.
  • Finish wear on Vibrant Stainless and Vibrant Brushed Moderne finishes. Kohler’s Vibrant finishes are multi-layer, and they hold up well under normal use. What kills them is abrasive cleaner. We regularly see dulled or scratched faucet finishes in Frisco homes where a scouring pad got used once. When we’re remodeling around a Kohler faucet, we spec a finish-safe cleaner and note it in the handoff.
  • Undermount sink separation in Kohler cast iron and enameled sinks. Cast iron is heavy, and if the original installer used clips alone without a proper support rail, the sink can shift or separate from the counter over time. We re-set these with a full support frame and silicone bedding, which is the method Kohler’s own installation guidance calls for.
  • Filtered-water faucet cartridge clogging. Kohler’s filtration faucets use a small cartridge that clogs faster than most homeowners expect, especially with harder water. We swap the filter cartridge during any kitchen remodel so you’re starting fresh, and we show you where it is and how to change it.
  • Garbage disposal flange corrosion where a Kohler sink meets a standard disposal. The stainless flange on most disposals will corrode against a cast-iron sink over years. When we remodel, we seat the flange with plumber’s putty rated for the application and check the seal during the final test.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Kohler Kitchen Remodeling Process

Every Kohler job follows the same six steps, and the price you get in step one is the price on the final invoice.

  1. 1
    Free in-home estimate and fixture walkthrough. We look at what Kohler products you have, measure the space, and talk through what stays and what goes. You get a written price before we leave, not a range and not a verbal ballpark.
  2. 2
    Written scope and product selection. We confirm the Kohler fixtures staying in place, the new cabinet line (KraftMaid and Wellborn are our standards), and the countertop material. You see the number in writing, with line items.
  3. 3
    OEM vs. aftermarket parts decision. For any Kohler fixture being serviced rather than replaced, we quote the OEM cartridge or valve and explain the trade-off against a quality aftermarket part. You decide, and it’s in the written scope.
  4. 4
    Demo and substrate prep. Cabinets come out, the cement board substrate (the moisture-resistant layer behind tile) goes in where required, and the job site gets a daily cleanup. Our technicians are background-checked and arrive in uniform.
  5. 5
    Install and test. Cabinets, countertops, backsplash, Kohler sink and faucet re-set, disposal flange checked. We run every fixture and check for drips before we call it done.
  6. 6
    Final walkthrough and the guarantee. You walk the kitchen with us, we hand over the written guarantee, and the 365-Day Done Right Promise covers the work. If something fails inside the year, we come back and fix it at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Kohler Kitchen Remodeling Costs in Frisco

Installers leveling a new base cabinet during a kitchen remodel

Here’s what a Kohler kitchen project actually runs in Frisco, broken out by scope:

Project Typical range
Full kitchen remodel $14,000 – $45,000
Small or partial kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What moves the number most is cabinet line (a semi-custom KraftMaid runs meaningfully higher than a stock line), countertop material (Cambria quartz sits above Silestone, and both sit above laminate), and whether the Kohler sink and faucet you’re keeping need to come out and go back in. Layout changes that move plumbing or gas push the number up too.

Call (833) 954-5757 for your free estimate. A live person answers 24/7, and the price you get is in writing before work starts.

Why Frisco Homeowners Call Penhallow Remodeling Frisco for Kohler Work

Most of our Frisco customers have been burned before. They’ve had a contractor give a verbal number that grew after demo, or a crew that didn’t show on the day it promised. We built our process around removing those two risks: a written price before work starts, and a written guarantee on every project. That’s The Kingswell Way, and it’s simple: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.

Our technicians have up to 22 years of experience, including Kohler-specific fixture work, and the 365-Day Done Right Promise means if something fails inside the year we come back and fix it free. We’re not a single-brand shop either. We also install KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops, and Toto fixtures when a Frisco homeowner wants options.

FAQs

A walk-in shower with large-format tile and a built-in niche

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Penhallow in Frisco

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Frisco team

A local vetted partner works across Frisco and the towns around it, to the same written standard as every Penhallow job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5757
Local Service Coverage

Request a Free Estimate in Frisco

Tell us what you need - Penhallow Remodeling Frisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch