







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs. Replacement in Frisco, TX: The Box-Condition Reality
Choose replacement if your cabinets are builder-grade particleboard from Frisco’s 1995-2015 subdivisions, and choose refacing only if the existing boxes pass a physical condition check first. Cabinet refacing in Frisco typically runs $4,000-$8,000 on a standard 30-linear-foot kitchen, while full replacement with Wellborn or KraftMaid cabinetry runs $8,000-$18,000. The cheaper number only holds up when the boxes underneath can carry a new veneer for the next decade. Call (833) 954-5757 and we’ll check yours before you spend a dollar either way.

Key Takeaways
- Refacing wins on price, but only when the cabinet boxes are structurally sound.
- In Frisco’s 1995-2015 builder kitchens, roughly 30% of the boxes we assess have moisture damage that rules out refacing.
- If you’re changing the layout at all, refacing can’t follow you. Replacement can.
- We quote both paths, in writing, at the same visit so you can compare total investment and expected lifespan.

Why the Standard Refacing Comparison Fails in Frisco Kitchens
Cabinet refacing pencils out beautifully on paper. New doors, new veneer on the box faces, new hardware, a fraction of the replacement cost. It stops making sense the moment you open the cabinet under your sink and find a swollen particleboard base. That’s not a rare find here. It’s the norm in Frisco’s builder-grade tracts.
Frisco went from roughly 6,000 residents in 1990 to more than 200,000 today, which means almost every house in this city is 30 years old or newer. The subdivisions that filled in from 1995 to 2015 were built fast, with particleboard cabinet boxes and a builder’s-grade assembly line behind them. Particleboard handles dry air fine. It does not handle North Texas humidity cycles, and it really doesn’t handle the slow drip from a dishwasher supply line or a sink cabinet that’s seen twenty summers of condensate. What looks solid from the outside is often a box that has already started to swell at the bottom edge. A veneer glued over that box won’t hold, and you’ll be paying twice inside five years.
The generic advice you’ll read online treats refacing as a straightforward budget answer. In Frisco, it’s a condition-dependent answer, and the condition is the part nobody quotes you on. That’s the whole gap in the comparison, and it’s the one we’d rather you close before you sign anything.
The Four Checkpoints We Run Before Recommending Refacing
Before we’ll put a refacing number on paper in Frisco, we run four physical checks on the existing cabinetry. Two or more failures and replacement is the smarter spend, even though it costs more up front.
- Face-frame squareness. We check whether the front frame is still square and plumb. Builder cabinets settle with the slab, and Frisco’s expansive clay soils swell and shrink with every wet-dry cycle, so a frame that was true in 2005 can be out of square today. A warped frame means new doors won’t hang flush no matter how carefully they’re fitted.
- Substrate integrity. We identify what the box is made of: particleboard, MDF, or plywood. Older plywood boxes are the ones that survive refacing well. Particleboard ones need a close look at every edge and joint.
- Moisture damage. We check under the sink and around the dishwasher, where leaks and condensate collect. Swollen particleboard, soft corners, or a base panel that crumbles under a screwdriver are disqualifying. This is the checkpoint that kills the most refacing plans in Frisco, and it’s the one hidden from every sales conversation.
- Hinge and drawer-slide condition. We test every door and drawer. Worn screw holes, sagging slides, and hinges that no longer hold adjustment tell us the box has taken a beating. Replacing hardware on a failing box is a patch, not a fix.
Fail two or more of these and refacing stops being the value play. Fail none, and refacing is genuinely worth considering. We tell you which, in writing.

Cabinet Refacing vs. Replacement Cost in Frisco
Here’s the honest cost comparison for a typical 30-linear-foot Frisco builder kitchen, using the cabinet lines we actually install. Refacing runs $4,000-$8,000. Replacement with Wellborn stock or KraftMaid semi-custom runs $8,000-$18,000. A full kitchen remodel that folds in new cabinets, counters, and layout work typically lands in the $14,000-$45,000 range depending on scope.
| Line Item | Typical Frisco Range |
|---|---|
| Cabinet refacing (existing boxes, same layout) | $4,000-$8,000 |
| Cabinet replacement (Wellborn stock or KraftMaid semi-custom) | $8,000-$18,000 |
| Cabinet installation (per the ranges we publish sitewide) | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Kitchen island installation | $3,000-$10,000 |
| Full kitchen remodel | $14,000-$45,000 |
The crossover point is the box check. Refacing only wins when the boxes pass the checklist and the layout isn’t changing. The moment you want to add a pantry cabinet, pull out a peninsula, or reconfigure a corner, refacing can’t follow, and the price gap starts shrinking against what you’d gain. What we’ll never do is hand you a verbal ballpark. Every Frisco homeowner gets a written price before any work starts, so the number on day one is the number on the invoice.
The Layout Lock-In Nobody Mentions
Refacing works only if you’re keeping the exact footprint. Doors change, the shape doesn’t. In Frisco’s larger open-concept builds, especially the newer homes in master-planned communities like Newman Village and The Trails, homeowners often want to open the kitchen up further or shift a wall of cabinets. Refacing makes that impossible. Replacement lets you move a cabinet, widen an island, or add a tall pantry without starting over a second time. If the goal is a better kitchen, not just a fresher face, replacement carries design flexibility that has real dollar value.

For a fuller picture of how cabinets, counters, and layout fit together in a Frisco project, see our guide to Kitchen Remodeling.
What the 365-Day Done Right Promise Actually Covers Under Each Option
The guarantee picture differs by path, and it’s worth knowing before you choose. A full replacement with KraftMaid or Wellborn cabinetry carries both our 365-Day Done Right Promise and the manufacturer’s warranty, so you get two layers of protection on the same cabinets. A reface carries our labor guarantee on the installation, but no manufacturer warranty on the existing boxes, because the boxes aren’t new. If they fail six months later, that’s on you, not on us and not on any cabinet manufacturer. We’d rather be clear about that now than argue about it later.
Our technicians have up to 22 years of experience, and we source materials from brands that stand behind the products we install: KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler and Moen fixtures. When you compare refacing to replacement, you’re also comparing what’s behind the guarantee, and replacement wins that comparison because the cabinet itself is new.
What a Written Quote Comparison Looks Like
We provide a written price for both paths at the same visit. Not a refacing estimate today and a replacement estimate after you push back. Both on paper, side by side, so you can weigh total investment and expected lifespan rather than the sticker price of refacing alone. That written number is the number you’ll hold us to. If the repair ever fails during the guarantee period, we come back and make it right at no charge, and there’s no service call or re-inspection fee on the return visit. It’s how we work every job, and it’s the same standard whether you choose refacing or replacement.
Penhallow Remodeling Frisco connects homeowners with independent local professionals who do the work, so our assessment is unbiased: we recommend the path that fits your boxes and your layout, not the one that pads an invoice.
FAQs
Refacing a typical 30-linear-foot Frisco kitchen runs $4,000-$8,000, and full replacement with Wellborn or KraftMaid cabinetry runs $8,000-$18,000. Refacing only wins if your existing boxes pass the condition checks and you’re keeping the layout. Call (833) 954-5757 for a written quote on both paths – estimates are free.
Sometimes, but often not. In Frisco’s 1995-2015 subdivisions, roughly 30% of the particleboard boxes we assess show moisture damage under the sink or near the dishwasher that won’t hold a veneer long-term. We run four checks (frame squareness, substrate, moisture, hardware) and two or more failures point to replacement. Call us to run yours.
Refacing is cheaper up front at $4,000-$8,000 versus $8,000-$18,000 for replacement, but only if the boxes are sound and the layout isn’t changing. If the boxes have water damage or you want to move a peninsula or add a pantry, replacement is the better spend over the life of the kitchen. Call (833) 954-5757 and we’ll show you both numbers in writing.
Yes. We run the four condition checkpoints and put a written price for refacing and for replacement in front of you at the same visit, so you compare total investment and expected lifespan. A live person answers our phone 24/7 at (833) 954-5757.
If you’d rather have it looked at, Penhallow Remodeling Frisco offers a no-pressure assessment in Frisco. We’ll open the cabinet under the sink, check the boxes, and hand you a written price for both paths before any work starts. Call (833) 954-5757 for a free estimate.
Written by the team at Penhallow Remodeling Frisco, serving Frisco, TX.


