







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Countertop Installation Costs in Frisco, TX (And the Slab Problem Most Price Guides Skip)
Countertop installation in Frisco typically runs $2,000-$6,500 for a standard kitchen, with material choice driving most of that spread: laminate sits at the low end, quartz and natural stone at the high end. But here’s the number most online guides leave out. In Frisco’s post-tension slab subdivisions, cabinet bases often need re-leveling before a new top goes down, and that labor can add a few hundred to well over a thousand dollars. Call (833) 954-5757 and we’ll put the full number in writing, leveling included, before anyone touches your cabinets.


Why So Many Frisco Countertop Quotes Change After Demo Day
Most Frisco kitchens sit on a post-tension slab, and those slabs have shifted at least a little in nearly every home we template. North Texas clay soils swell when it’s wet and shrink when it’s dry, and that cycle never really stops. A 3/8-inch dip across your cabinet run is common. It’s also invisible until you lay a straightedge on the old counters or set a new quartz slab in place and watch one corner sit proud of the rest.
What happens next is where budgets break. A contractor who quoted from a photo discovers the variance during tear-out, calls it “unforeseen,” and adds labor on the spot. We’ve heard that story from homeowners in Stonebriar and The Trails more than once. The fix is simple: the leveling labor gets measured and priced during the template visit, not guessed at afterward. That means a written price before the work starts, and a number on day one you can still recognize on the final invoice.
Frisco grew from roughly 6,000 people in 1990 to well over 200,000 today, so almost every kitchen here is 30 years old or newer. That works in your favor. You’re rarely dealing with rotted framing or a century-old subfloor. But slab-on-grade construction with tensioned cables running through it means any cutout needs to be planned, not improvised.
What’s Actually in a Countertop Installation Price
Five things drive the total, and only one of them is the slab itself. Here’s what a real Frisco quote should itemize:
- Material. Laminate, quartz, or natural stone. This is the biggest single line.
- Template fee. A precise digital template of your cabinets, usually $100-$250, sometimes credited back against the order.
- Fabrication and edge profile. Cutting the slab, polishing edges, radius corners.
- Cutouts. Each sink, cooktop, and faucet hole adds labor. An undermount sink cutout typically runs $75-$200 on its own.
- Cabinet re-leveling. The line most quotes leave off. On a shifted Frisco slab, expect it to appear.
Removal and haul-away of the old top is a separate line, usually $150-$400. If you’re weighing a new counter against a bigger change, it’s often smarter to plan both at once. Our Kitchen Remodeling page lays out how counters fit into a full layout change.

Real Installed Ranges for a 40-55 sq ft Frisco Kitchen
Most Frisco tract-home kitchens land between 40 and 55 square feet of counter surface once you count the perimeter run and a small island or peninsula. Here’s what each material actually costs installed at that size:
| Material & Scope | Installed Cost |
|---|---|
| Laminate, 40-55 sq ft, standard edge | $2,000-$3,200 |
| Tile (ceramic or porcelain), 40-55 sq ft, with grout and trim | $2,200-$3,800 |
| Silestone quartz, 40-55 sq ft, one sink cutout | $3,200-$4,800 |
| Caesarstone quartz, 40-55 sq ft, one sink cutout | $3,400-$5,200 |
| Cambria quartz, 40-55 sq ft, one sink cutout, upgraded edge | $3,800-$6,500 |
| Cabinet re-leveling (when slab variance is found) | $300-$1,200 |
| Old countertop removal and haul-away | $150-$400 |
Why the gap between the three quartz brands? Cambria is a domestic product with a tightly controlled pattern range and a lifetime warranty behind it. Silestone leans on its antimicrobial surface and a wider palette, which keeps it a step below Cambria on price. Caesarstone sits between them, with strong consistency across batches. All three are engineered quartz, so they’re non-porous and don’t need sealing, which is worth real money over the years compared to natural stone. We install all three because each one has a homeowner it fits, not because one is universally “best.”
The Cutout Risk Nobody Warns You About
Coring a sink hole into a post-tension slab without first locating the tensioned cables can crack the slab, void its structural warranty, and in the worst case do real damage. This is a genuine safety and structural issue, not a sales talking point, and it’s why we treat cutout placement as a planning step rather than a fabrication detail.

Any professional running a cutout in a Frisco home should confirm cable location before the saw comes out, usually from the original post-tension drawings or a scan. If you’re hiring a fabricator directly, ask them how they handle it on tensioned slabs. A confident answer tells you a lot. A shrug tells you more. We don’t hand off that risk to a third party; the pre-job process accounts for it before anyone cuts.
A Written Price That Survives the Template Visit
Here’s how the number holds. Our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s in your kitchen. During the template visit, we measure the slab variance and the cabinet run together. If re-leveling is needed, it goes into the written price you receive before fabrication begins. Not a range. Not “TBD pending demo.” A number.
The 365-Day Done Right Promise sits behind the work. If a seam fails, a corner chips, or the install doesn’t hold up inside the first year, we come back and fix it at no charge, and it’s covered in writing on every project. That’s the difference between a quote and a guarantee. If a repair ever fails, the return visit is free, no service call fee.
When the counter swap is part of something larger, it helps to see the whole picture before you commit. Our home page covers how we approach a project end to end.
FAQs
Countertop installation in Frisco generally runs $2,000-$6,500 installed for a typical 40-55 square foot kitchen, depending on material and cutouts. Add $300-$1,200 if your cabinets need re-leveling on a shifted slab. Call (833) 954-5757 for an exact written quote, free of charge.
For most Frisco homeowners, quartz is worth it over laminate because it doesn’t swell with moisture, doesn’t scratch from a dropped can, and doesn’t need replacing in a decade. Engineered quartz from Cambria, Silestone, or Caesarstone is non-porous, so no sealing. That’s roughly $1,000-$3,000 more up front and years of life on the back end. Call us and we’ll run both numbers for your kitchen.
Yes, in most cases you can keep your existing cabinets as long as they’re structurally sound and reasonably level. If the slab has shifted enough that the cabinet run is out of plane, we re-level first, which adds the $300-$1,200 line. We inspect that during the template visit so there are no surprises later. Call (833) 954-5757 to schedule it.
Yes, and we confirm the location of tensioned cables before any cutout is made, because coring blind into a post-tension slab can crack it and void the structural warranty. That check happens before the fabricator arrives, not during installation. It’s a standard part of our pre-job process. Call (833) 954-5757 with questions about your specific slab.
Get a Written Countertop Price Before the First Template Cut
You’ve got enough surprises in a remodel without a bill that climbs after demo. We give you a written number, a real arrival window, and a 365-day guarantee on every install, plus a live person on the phone 24/7. Call (833) 954-5757 for a free estimate and put the price in writing before anything gets cut.
Written by the team at Penhallow Remodeling Frisco, serving Frisco, TX.
What Our Customers Say
"Full kitchen down to the studs. The written estimate held and they finished on the day they promised. Crew was tidy and polite the whole month. Rare to find."
- Vernon Askew"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












