







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Frisco, TX
A walk-in shower remodel in Frisco typically runs $6,500 to $18,000, depending on tile, glass and whether the drain has to move. It’s a curbless or low-threshold shower with no tub to step over, built so you can walk in flat-footed and stay safe on wet tile. For a lot of Frisco homeowners between 35 and 60, it’s the one bathroom change that makes the room work for a parent who’s getting older, a kid who’s getting taller, and a house that’s probably going to sell in the next decade.
We do this work as part of full bathroom remodeling, not as a one-day tile swap. That means we open the wall, check the framing, rebuild the waterproofing the right way, and put a written price in your hands before anyone picks up a chisel. If you’ve had a contractor disappear mid-job or hand you a “ballpark” that grew legs after demo day, the first thing we’ll do is put the number in writing. Call (833) 954-5757 and a real person answers, day or night.
Key Takeaways
- Walk-in showers in Frisco generally run $6,500 – $18,000, with glass, tile size and drain relocation driving most of the spread.
- We give you a written price before work starts – not a range, not a verbal estimate.
- Every shower is covered by our 365-Day Done Right Promise, in writing.
- Technicians are background-checked, arrive in uniform, and have up to 22 years of experience.
- A live person answers the phone 24/7 at (833) 954-5757.

When You Need Walk-In Showers & Shower Remodeling
Most Frisco shower projects start with a specific frustration, not a magazine photo. Here are the ones we hear most:
- The tub is a hazard. A parent or grandparent is stepping over a 16-inch tub wall, and everyone in the house is quietly worried about it. A low-threshold shower with a built-in bench and grab bar blocking solves that without making the bathroom look like a hospital.
- Black mold keeps coming back at the caulk line. Frisco’s clay-heavy soil and shifting foundations can open hairline cracks in the shower pan or grout, and water finds them. If you’ve recaulked three times and it keeps returning, the waterproofing behind the tile is failing, not the caulk.
- The tile is dated and the glass is foggy. Builders in Frisco’s 2005-to-2015 subdivisions used the same beige 4-inch tile in thousands of primary baths. If yours is original, it’s due – and while the wall is open, we can fix the framing, insulation and drain at the same time.
- You want a bench, a niche, or a handheld shower head. Aging in place, a knee injury, or just a preference for sitting while you shave. These are small additions if planned up front and expensive to retrofit later.
- The shower is small for the room. Many Frisco primary baths have a tub-and-shower combo that eats floor space. Removing the tub and extending the shower can make the room feel twice as large.
- You’re remodeling before a sale or a family change. A walk-in shower is one of the few bathroom upgrades that both appraisers and buyers recognize immediately, especially in the $500K-plus range common across Frisco.
Our Walk-In Showers & Shower Remodeling Process
Every Penhallow project runs on The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. Here’s how that plays out on a shower:
- In-home walkthrough and written price. We measure the shower, look at the drain location, check the water pressure and ask how you actually use the room. You get a written number before anyone starts – the same number that shows up on your final invoice.
- Material selection. We walk you through tile, fixtures and glass. We source from trade brands we trust, including Kohler and Moen fixtures, so the parts behind the guarantee are as solid as the guarantee itself. Structured-glass panels like those from Cover are one option for frameless enclosures; we’ll talk through the tradeoffs.
- Demo with protection. Floors are covered, dust barriers go up, and the crew hauls debris daily. No pile of tile in your driveway for a week.
- Rough-in and waterproofing. This is the part you can’t see and can’t skip. We set a cement board substrate (the moisture-resistant layer behind your tile), apply a bonded waterproof membrane, and pre-slope the drain so water never sits. This is where cheap showers fail and ours don’t.
- Tile, glass, trim and final walkthrough. We set the tile, install the glass, seal the grout, and walk the room with you. Anything that doesn’t look right, we note in writing and fix before we close the job.

Walk-In Showers & Shower Remodeling Pricing in Frisco
Frisco shower remodels typically run $6,500 to $18,000, with most landing between $9,000 and $14,000. A simple tile-and-glass swap with the drain staying put is at the low end; moving plumbing, adding a bench, a niche, a frameless enclosure or heated floors pushes toward the top. Here’s what drives the number:
| Line Item | Typical Range |
|---|---|
| Demo, disposal and protection | $400 – $900 |
| Waterproofing (cement board substrate, membrane, pre-sloped pan) | $1,200 – $2,500 |
| Tile install, labor and material | $2,500 – $6,500 |
| Glass enclosure (semi-frameless to frameless) | $900 – $3,200 |
| Fixture package (Kohler, Moen, or similar trade brands) | $600 – $2,000 |
| Drain relocation or plumbing changes | $800 – $2,800 |
| Bench, niche, grab-bar blocking, or heated floor | $500 – $2,200 |
The reason we publish real ranges: you should be able to tell from your kitchen table whether this is a spring project or a fall one. Every quote we give is free, and every quote comes as a written number, not a range with an asterisk. Call (833) 954-5757 for a free estimate on your Frisco shower.
A couple of things that tend to shift cost in Frisco specifically. The soil here moves, and showers on slab foundations in older neighborhoods sometimes reveal cracks at the drain collar that weren’t visible from the surface – we check for it during the walkthrough so it doesn’t surprise anyone mid-job. And because Frisco’s housing stock skews newer, we run into a lot of prefab shower pans from the 2010s that have failed at the seams. If your pan is prefab and your tile is still in good shape, we can sometimes keep the tile and replace just the pan, which cuts the number roughly in half.
More On How We Work
Two more things worth knowing before you hire anyone, including us. First, a glass enclosure is the single biggest visual upgrade and the single easiest place to cut corners. Cheap glass looks the same on install day and looks different in two years when the coating fails. Second, prefab modular shower units are having a moment – brands like Dvele, Mighty Buildings and Boxabl are doing interesting work in factory-built components, and for the right project a modular shell can make sense. We’ll tell you honestly when one fits your Frisco bathroom and when it doesn’t, because it’s easy to sell and hard to service later if the unit doesn’t match standard rough-in dimensions.
If your project grows beyond the shower – and it often does once you see the tile in the rest of the room – we also handle full kitchen and bath remodels under the same written-price model. Have a look at how the bathroom side works end to end, then call us when you’re ready to put a number on paper.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Frisco?
A walk-in shower remodel in Frisco typically costs $6,500 to $18,000, with most projects landing between $9,000 and $14,000. The final number depends on tile choice, glass type, whether the drain moves, and any accessibility features like a bench or grab-bar blocking. Call (833) 954-5757 for a free written estimate – the price we quote is the price on the invoice.
Can you convert my tub into a walk-in shower in one visit?
No, and any contractor who tells you otherwise is skipping the waterproofing step. A tub-to-shower conversion takes five to ten working days in most Frisco homes because the cement board substrate, membrane and pre-sloped pan need time to cure before tile goes down. Rushed conversions are the number-one cause of the shower-pan leaks we’re called out to fix. We’ll give you a real schedule up front and a written arrival window each morning.
Is a walk-in shower safer than a tub for aging in place?
Yes – a curbless or low-threshold shower removes the step-over that causes most bathroom falls. A traditional tub wall is 15 to 17 inches high; a walk-in shower threshold is usually under two inches, and a true curbless design is flush with the floor. Add a built-in bench and grab-bar blocking and the shower becomes genuinely usable for someone with limited mobility. We plan those features into the framing during the remodel so they don’t have to be retrofitted later.
Do your walk-in shower remodels come with any guarantee?
Yes. Every shower we build is covered by our 365-Day Done Right Promise, in writing. If something we installed fails within that year – a leak at the pan, a grout failure, a glass door that won’t close right – we come back and fix it at no charge. Our technicians have up to 22 years of experience, they’re background-checked, and they arrive in uniform so you know exactly who’s walking into your home. If you need a repair after the warranty period, we offer a free second visit if the first one didn’t take. Call (833) 954-5757 to get started.
Get a Written Price Before You Start
The next step is simple: call us at (833) 954-5757, tell us what’s wrong with your shower, and we’ll schedule a walkthrough. You’ll get a written price before any work begins, a real arrival window, and the 365-Day Done Right Promise on the finished job. A live person answers the phone any hour of the day. That’s not a slogan – it’s how we work.
Written by the team at Penhallow Remodeling Frisco, serving Frisco.


